AoSept + Classic 2x360ml + Lens Case

Aosept Plus contact lens care system - preservative-free, aqueous solution with hydrogen peroxide 3%, phosphonic acid (stabiliser), sodium chloride, phosphate (buffer system), Pluronic 17R4 poloxamer (surfactant) and AOSept Plus lens case with AODisc (A Trademark of American Optical IP Corporation) - cleans, disinfects, neutralises (minimum soak time 6 hours), removes protein and stores all types of contact lenses including silicone-hydrogels.

Features & Benefits

• Aosept Plus TWIN Pack is ideal for silicone hydrogel lenses.
• Deep cleaning for comfort that lasts.

Instructions for Using AOSEPT PLUS Solution Safely:

1. Do Not Put AOSEPT PLUS Solution Into Your Eye Directly

   • Never place the solution directly into your eye or onto a contact lens immediately before inserting it. This can cause burning and stinging.

2. Wash and Dry Your Hands

   • Wash your hands thoroughly and dry them with a clean, lint-free towel.

3. Place Your Lenses in the Lens Holder

   • Open the lens holder marked "L," remove your left lens, and place it on the dome.
   • Close the lens holder carefully to avoid trapping your lens.
   • Repeat the procedure with your right lens and the holder marked "R."

4. Open the AOSEPT PLUS Bottle

   • Flip open the cap on the AOSEPT PLUS bottle and bend it back out of the way.

5. Rinse Your Lenses

   • Rinse the lenses thoroughly in the lens holders with AOSEPT PLUS solution for 5 seconds.

6. Fill the Lens Cup

   • Fill the cup with AOSEPT PLUS solution up to the fill-line. Do not underfill or overfill.

7. Secure the Lens Holder in the Cup

   • Place the lens holder in the cup and screw the lid closed.
   • Do not overtighten (only finger-tight).
   • Do not shake the lens case.

8. Store the Lens Case Upright

   • Keep the lens case upright while the solution works.
   • If bubbles leak from the top of the case, non-neutralized solution may be present.
   • Empty the lens case and rinse it thoroughly with sterile saline.
   • Clean up any spillage immediately and wash your hands again before handling your lenses.

9. Repeat the Disinfection Procedure if Spillage Occurs

   • If there is spillage, repeat the disinfection process from the beginning.

10. Soak Lenses for at Least 6 Hours

    • Allow your lenses to soak for a minimum of 6 hours or overnight to neutralize the solution.

11. Remove Your Lenses After Soaking

    • Wash, rinse, and dry your hands thoroughly before removing the lenses from the holder.

12. Rinse Lenses with Sterile Saline (Optional)

    • If recommended by your eye care professional, rinse lenses with sterile saline after neutralization.
    • Do not use AOSEPT PLUS to rinse lenses before insertion.

13. Prepare Lenses for Wear

    • Your lenses are now ready to wear.

14. Clean and Air-Dry the Lens Case

    • Discard the used solution.
    • Rinse the lens cup and holder with sterile saline (not tap water or other non-sterile liquids).
    • Allow the lens case to air-dry by inverting the holder outside the cup.
    • Do not place the lens case on its side while drying.

15. Storing Lenses After Neutralization

    • If you do not plan to wear your lenses immediately, you may store them in neutralized AOSEPT PLUS solution in the unopened case for up to 14 days.
    • After 14 days, clean and disinfect your lenses with AOSEPT PLUS again before wearing.

16. Use Only AOSEPT PLUS for Cleaning and Disinfecting

    • Always use AOSEPT PLUS for cleaning, disinfecting, and storing reusable contact lenses. Avoid using other non-sterile solutions or tap water.

Important Notes:

• Always follow your eye care professional's instructions.
• Ensure that all parts of the lens care process are completed carefully to avoid irritation or infection.
• If irritation occurs, discontinue use and consult your eye care professional immediately.