Complete Multi-Purpose EasyRub 2x240mL + Lenses Case

Complete EasyRub Formula helps maintain clean and comfortable contact lenses.
Complete Multi-Purpose comes with TWO 240mL bottles and a free lens case.
Disinfects by:
-          Killing a broad range of bacteria and microorganisms on your lenses to protect eyes against infection
-          Removing protein and debris to thoroughly clean your lenses
Provides Comfort by:
-          Rewetting contact lenses surface to provide lens wearing comfort
-          Promoting healthy lens wearing experience as it contains 4 beneficial electrolytes
Suitable for:
-          Soft contact lenses

Ingredients
Complete Multi-Purpose Soltuion is a sterile, buffered isotonic solution which contains purified water, sodium chloride, potassium chloride, sodium phosphate dibasic (heptahydrate), Poloxamer 237 0.05%, edetate disodium, sodium phosphate monobasic (monohydrate) and preserved with polyhexamethylene biguanide 0.0001%

Directions
When removing your lenses:

1. Wash and dry your hands prior to handling your lenses
2. Remove lens and place 3 drops or more of Complete MPS on one side of the lens surface.  Rub lens gently from the centre to the edges for at least 10 seconds.  Never rub in a circular motion, because it may tear the lens and not clean the outer edge surface.
3. Repeat the rubbing steps for the other side of the lens
4. Rinse each side of the lens for 5 seconds using Complete MPS
5. Fill your contact lens case with fresh Complete MPS and allow the lens to soak for a minimum of 6 hours.
6. Repeat for other lens.

When inserting your lenses:

1. Wash and dry your hands prior to handling your lenses.
2. Rinse each side of your lenses for 5 seconds with Complete MPS to remove any debris before re-inserting lenses.

Caution
Keep bottle cap tightly closed when not in use.  Store at room temperature (<25 degrees Celsius).  Use before expiration date marked on carton and bottle.  Discard any remaining solution 90 days after first opening the bottle.